(203) 733-2110

Eliminator™ RF Filters for DC Sputtering Power Supplies


The Eliminator Filter module shown to the left includes type UHF I/O connectors. Alternate connector types are available.

The enclosure size for 3 amp models is 4.5″ (114.5mm) long X 2.5″ (64mm) wide X 2.17″ (55.1mm) high. The I/O connectors will add additional length to their mounting position.

The Eliminator Filter module is best mounted at the RF source however, it may be alternately mounted at the opposite end of the coaxial connection cable (typically at the power supply / controller side). Always use a high quality interconnect cable and/or adapter. Additionally, the filter module’s box can be grounded using a short, low inductance metal strip. 



Eliminator Filter Application Questionsrf-witch-doctor

Eliminator RF Blocking Filters for use with DC Power Generators

Eliminator RF Blocking Filters for use with Pulsed DC Power Generators

Complementary Products